Ciena AIOps for planning

1 00:00:03,390 --> 00:00:06,650 We're going to click on the top right-hand button, the blue 2 00:00:06,650 --> 00:00:10,110 Gen AI Assistant button. This allows us to have a 3 00:00:10,110 --> 00:00:12,670 conversation with the system and ask any question that 4 00:00:12,670 --> 00:00:14,550 we want. In this case we're going to ask for that 5 00:00:14,550 --> 00:00:20,290 800 gig IP capacity between sites DC1 and DC3. So we 6 00:00:20,290 --> 00:00:24,000 can actually ask the system to design a solution to 7 00:00:24,000 --> 00:00:28,330 remedy this situation and it's going to go away and it's 8 00:00:28,330 --> 00:00:31,030 going to go through a variety of steps to analyze 9 00:00:31,030 --> 00:00:34,460 a network and come up with a solution which we click 10 00:00:34,460 --> 00:00:37,390 on view analysis, we can actually look at that. So 11 00:00:37,390 --> 00:00:40,490 here we can see that the 800 gig capacity has resulted 12 00:00:40,490 --> 00:00:44,410 in oversubscription of the two links, 49 and 50, 13 00:00:44,450 --> 00:00:47,250 especially the 50 link at the bottom there is heavily 14 00:00:47,250 --> 00:00:52,310 oversubscribed. So the system will then go ahead 15 00:00:52,310 --> 00:00:56,950 and compute a solution to relieve the oversubscription 16 00:00:56,950 --> 00:01:00,510 on those links. We click into step two and we 17 00:01:00,510 --> 00:01:03,690 can see here that the system has recommended an IP 18 00:01:03,690 --> 00:01:07,750 Express link, actually IP TL 53. We can visualize 19 00:01:07,750 --> 00:01:10,490 the photonic services that are required to carry 20 00:01:10,490 --> 00:01:13,710 that link and we can also see that all the links are 21 00:01:13,710 --> 00:01:16,110 green which means that they are now under the 22 00:01:16,110 --> 00:01:19,530 engineered threshold required by the service provider.